Factory wholesale Mola Tube - Electrode for Electromagnetic Flowmeter – WINNERS
Factory wholesale Mola Tube - Electrode for Electromagnetic Flowmeter – WINNERS Detail:
Product Description
The (integrated) electromagnetic flowmeter consists of a sensor and a converter. It is based on Faraday’s law of electromagnetic induction and is used to measure the volume flow of conductive liquids with a conductivity greater than 5μS/cm. It is an inductive instrument for measuring the volume flow of conductive media. In addition to measuring the volume flow of general conductive liquids, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali, and uniform liquid-solid two-phase suspension liquids such as mud, ore pulp, and paper pulp.
The signal electrode is thoroughly electrostatically shielded to ensure that the small signal will not be disturbed by the coil and to ensure the measurement accuracy of low flow rate.
Product Parameters
| Products name | Electrode for flowmeter |
| Available material | Tantalum, HC276, Titanium, SS316L |
| MOQ | 20 pieces |
| Single electrode size | M3,M5, M8 |
| Grounding electrode | DN25~DN350 |
Electromagnetic flowmeter electrode material types:
1. 316L(Domestic water, industrial water, raw well water, urban sewage,Corrosive acid, alkali, salt solution).
2. Hastelloy B and Hastelloy C(Resistant to oxidizing acid, oxidizing salt, seawater, non-oxidizing acid, non-oxidizing salt, alkali, sulfuric acid at room temperature.).
3. Titanium(Resistant to seawater, various chlorides and hypochlorous hydrochloric acid, chlorinated acids (including fuming nitric acid), organic acids, alkalis).
4. Tantalum(Resistant to other chemical media except hydrofluoric acid, fuming sulfuric acid and alkali, including boiling point hydrochloric acid, nitric acid and sulfuric acid below 175℃.).
Picture show
Signal electrode
Grounding Electrode
Application
● For electromagnetic flowmeters
Order Information
Inquiries and orders should include the following information
● Signal electrode (Thread size, length)
● Grounding electrode(DN No, thickness)
● Quantity
Product detail pictures:
Related Product Guide:
Our company insists all along the quality policy of "product quality is base of enterprise survival; customer satisfaction is the staring point and ending of an enterprise; persistent improvement is eternal pursuit of staff" and the consistent purpose of "reputation first, customer first" for Factory wholesale Mola Tube - Electrode for Electromagnetic Flowmeter – WINNERS , The product will supply to all over the world, such as: Bolivia, Liberia, Holland, We have more than 10 years exported experience and our products have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By John biddlestone from Uganda - 2018.11.28 16:25
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Letitia from Rio de Janeiro - 2017.11.20 15:58
Related Products
-
PriceList for Crucible Inserts Made Of Tungsten...
-
Massive Selection for Tungsten Wire Coil Heater...
-
Competitive Price for Molybdenum Wire For Edm -...
-
Cheap price Refractory Thread Rod - Electrode ...
-
New Delivery for Tantalum Round Ring With A Hol...
-
Factory supplied Tungsten Wire For Metallizing ...