Electromagnetic Flow Meter Electrode
Product Description
Why do you need electrodes
Electromagnetic flowmeter consists of sensors and converters. It is based on Faraday's law of electromagnetic induction and is used to measure the volume flow of conductive liquids with conductivity greater than 5μS / cm. It is an induction meter for measuring the volume flow of a conductive medium. In addition to measuring the volume flow of general conductive liquids, it can also be used to measure the volume flow of strong corrosive liquids such as strong acids and alkalis, as well as uniform liquid-solid two-phase suspended liquids such as mud, pulp, and pulp.
The signal electrode is completely electrostatically shielded to ensure that the small signal will not be interfered by the coil and ensure the accuracy of small flow measurement.
| Products name | Electrode for flowmeter |
| Available material | Tantalum, HC276, Titanium, SS316L |
| MOQ | 20 pieces |
| Single electrode size | M3,M5, M8 |
| Grounding electrode | DN25~DN350 |
Our advantage
■ Physical manufacturers, price concessions
■ Professional equipment, high quality assurance
■ Fast Shipping, Shorter Lead Time
Electromagnetic flowmeter electrode material types
1. 316L (Domestic water, industrial water, raw well water, urban sewage, Corrosive acid, alkali, salt solution).
2. Hastelloy B and Hastelloy C (Resistant to oxidizing acid, oxidizing salt, seawater, non-oxidizing acid, non-oxidizing salt, alkali, sulfuric acid at room temperature.).
3. Titanium (Resistant to seawater, various chlorides and hilarious hydrochloric acid, chlorinated acids (including fuming nitric acid), organic acids, alkalis).
4. Tantalum (Resistant to other chemical media except hydrofluoric acid, fuming sulfuric acid and alkali, including boiling point hydrochloric acid, nitric acid and sulfuric acid below 175℃).
Order Information
Inquiries and orders should include the following information:
☑ Signal electrode (Thread size, length) ☑ Grounding electrode(DN No, thickness) ☑ Quantity
*You may need to know: Most metal diaphragms have ready-made molds, these only pay for the diaphragm. However, there are still some styles that may need to make molds, and you need to pay a certain mold fee at this time. Of course, when you buy this specification next time, you don't have to pay for the mold again.
