Cheap price Tzm Welded Tube - Grounding Ring for Electromagnetic Flow Meters – WINNERS
Cheap price Tzm Welded Tube - Grounding Ring for Electromagnetic Flow Meters – WINNERS Detail:
Product introduction
The grounding ring is connected to both ends of the flow sensor of the insulating lined metal or plastic pipe. Its corrosion resistance requirements are slightly lower than that of electrodes, which can allow certain corrosion, but need to be replaced regularly, usually using acid-resistant steel or Hastelloy. Due to its large size, precious metal materials are generally not used. Do not use grounding rings if metal process piping is in direct contact with the fluid. If it is non-metallic, a grounding ring must be provided at this time.
Due to the weak signal of the electromagnetic flowmeter, it is only 2.5~8mv at full scale, and only a few microvolts when the flow is very small. slight disturbances from the outside world will affect the measurement accuracy. The equipment pipeline must be grounded, and the grounding point must be set separately, and must not be connected to the common ground wire of the motors, electrical appliances, or the upper and lower water pipes. The converter part has been grounded through the cable. Please do not ground it again to avoid interference due to different ground potentials.
Selection Suggestion
How to choose a suitable material? I believe this is a question you need to consider. Now, we make some recommendations for you, which you can refer to accord to the table. Of course, you can also ask us directly, our Whatsapp account is online 24h, please contact her (+86 156 1977 8518).
|
Material |
Applicable environment |
|
316L |
Industrial water, domestic water, sewage, neutral solution and weak acid such as carbonic acid, acetic acid and other weak corrosive media |
|
HC |
Resistant to oxidative acids such as a mixture of nitric, chromic and sulfuric acids. Also resists corrosion from oxidizing salt or other oxidizing environments. Good corrosion resistance to seawater, salt solutions and chloride solutions. |
|
HB |
It has good corrosion resistance to non-oxidizing acids, alkalis and salts such as sulfuric acid, phosphoric acid and hydrofluoric acid. |
|
Ti |
Corrosion resistant to seawater, various chlorides and hypochlorites, and various hydroxides. |
|
Ta |
Resistant to almost all chemical media except hydrofluoric acid. Due to the high price. It is only used for hydrochloric acid and concentrated sulfuric acid. |
Order Information
Inquiries and orders should include the following information:
☑ Most of the grounding rings are customized products, please provide drawings for high quality prices.
☑ Surface: glossy, alkaline wash, etc.
☑ Please contact us for details.
We specialize in the production of grounding rings of various materials, especially HC, tantalum, titanium, etc. Our products are of high quality and the price is right. We believe they are exactly what you need.
Product detail pictures:
Related Product Guide:
Persisting in "High quality, Prompt Delivery, Aggressive Price", now we have established long-term cooperation with consumers from equally overseas and domestically and get new and old clients' large comments for Cheap price Tzm Welded Tube - Grounding Ring for Electromagnetic Flow Meters – WINNERS , The product will supply to all over the world, such as: Russia, Mumbai, Casablanca, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we'll continue to develop, to supply the high-quality goods and services, and promote lasting cooperation with our customers, common development and create a better future.
By Jill from Manchester - 2018.09.16 11:31
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Natividad from Surabaya - 2017.11.29 11:09
