2022 China New Design Molybdenum Heater Manufacturer - Molybdenum heat shield – WINNERS
2022 China New Design Molybdenum Heater Manufacturer - Molybdenum heat shield – WINNERS Detail:
Product Description
As the heat insulation component in the vacuum furnace , the biggest function of the heat shield is to block and reflect the heat in the furnace . Therefore , high-purity , accurate size , smooth surface, easy assembly , and reasonable design of heat shields are very important . Molybdenum heat shields are generally produced and processed with 0.5-1.2 mm molybdenum sheets . Generally, there are 4-6 layers. The inner layer of the furnace is made of high-temperature molybdenum TZM material with a thickness of 1.2 mm . Molybdenum strips are used to separate the layers with a space of 7mm . Other molybdenum heat shields are made of 0.5 – 0.8 mm MO1 material . Fasten them with molybdenum screws or molybdenum wire rods.
Product Parameters
| Products name | Molybdenum heat shield |
| Available material | Tungsten、Molybdenum、MoLaTZM、SS304(Stainless steel) |
| Thicknes | 0.2~0.5~1mm |
Design points of metal heat shield
| Material thermal properties | The maximum temperature of the selected metal material should be greater than the ambient working temperature, and the thermal deformation of the metal should be small. When the temperature is higher than 900℃, tungsten, molybdenum and tantalum sheets are generally used. Below 900℃, stainless steel sheet is generally used |
| material blackness | Choose a material with low blackness, the reflection effect of the surface is better, and the surface finish is higher. |
| Material thickness | The thickness of the screen should be as thin as possible. Molybdenum is generally 0.2~0.5mm, and stainless steel sheet is generally 0.5~1mm |
| material price | Under the condition of meeting the working temperature, the cost should be considered |
| Determination of the number of layers of heat shield | With the increase of the number of layers, the heat loss will decrease, the cost will increase, the structure will be complicated, and the vacuum degree will be more difficult to meet the working requirements. Increase to three layers to improve about 8%. The number of layers is not the better, and it should be considered comprehensively. The working temperature is 1000 ℃, and a maximum of 6 layers of screens can be used. |
| Spacing between each layer of heat shield | The spacing should be minimized. The thermal effect of increasing the distance is not large. If the spacing is too small, the two layers of heat shields will be connected together due to thermal deformation. Reduce the spacing, generally about 10mm |
| connection between each layer | Each layer of heat shield should be connected, and it should be ensured that the contact area of the connection is not too large, which will reduce the thermal efficiency. Use bushings and washers to connect each layer. |
| Maintenance of heat shields | The heat shield should be designed to be easily removable, and the thermal expansion and contraction properties of the material should also be considered. |
| The distance between the first screen and the radiating surface | Generally 50~100mm |
| The distance between the outermost screen and the circulating water wall | Generally 100~150mm |
Order Information
Inquiries and orders should include the following information
● Drawing of the Molybdenum isolation screen
● Material of the screen( W, Mo, Ta or SS304)
● Quantity
Product detail pictures:
Related Product Guide:
We thinks what prospects think, the urgency of urgency to act from the interests of a client position of theory, allowing for greater high-quality, reduced processing costs, rates are much more reasonable, won the new and previous consumers the support and affirmation for 2022 China New Design Molybdenum Heater Manufacturer - Molybdenum heat shield – WINNERS , The product will supply to all over the world, such as: Myanmar, Hongkong, Jakarta, We have many years' experience in hair product production, and our strict QC Team and skilled workers will ensure that we give you top hair products with the best hair quality and workmanship. You will get successful business if you choose to cooperate with such a professional manufacturer. Welcome your order cooperation!
By Frederica from Canada - 2017.09.30 16:36
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Danny from Luxembourg - 2017.10.13 10:47
Related Products
-
High Quality Tungsten Wire For Heating - E-Bea...
-
Manufacturer for Hammer For Crush The Polysilic...
-
Super Purchasing for Tungsten Cube Cost - Tung...
-
Factory For Wolfram Heating Wire - Grounding R...
-
OEM manufacturer Tungsten Round Bar - Tungsten...
-
factory customized Machining Tantalum Round Bar...
Write your message here and send it to us